Epson ES-800C, User Manual

Page: 11 / 89

1.
2.
3.
Read all of these instructions.
Follow all warnings and instructions marked on the scanner.
Unplug this scanner from the wall outlet before cleaning. Use a
damp cloth for cleaning and do not use liquid or aerosol cleaners.
4.
5.
Do not use this scanner near water.
Do not place the scanner on an unstable cart, stand, or table
because it may fall, causing serious damage.
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation; to ensure reliable operation and
protection from overheating, these openings must not be blocked
or covered. The openings should never be blocked by placing the
scanner on a bed, sofa, rug, or other similar surface. The scanner
should never be placed near or over a radiator or heat register,
and it should not be placed in a built-in installation unless
proper ventilation is provided.
7.
Use the type of power source indicated on the marking label. If
you are not sure of the type of power available, consult your
dealer or local power company.
8. This product may be equipped with a 3-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will only
fit into a grounding-type outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the
purpose of the grounding-type plug.
9. Do not put your scanner where the cord will be walked on.
4 Introduction