Epson EPL-N4000+ Setup Manual Download Page 70

Page: 70 / 81

After This...

System Requirements for the Online Guide

For Windows

For Macintosh

System

Windows 95, 98, Windows NT 4.0, Windows 3.1, or NT
3.51

CPU

i486/25 MHz (for Windows 95 / NT 4.0)
i486/66 MHz (for Windows 98)
i486/25 MHz (for Windows 3.1 / NT 3.51)
(Pentium or higher recommended)

Memory

16 MB (32 MB or more recommended)

Hard disk space

4 MB to install the Reference

CD-ROM drive

Double-speed (quad-speed or faster
recommended)

Display

640 x 480 pixel or 800 x 600 pixel resolution, with High
Color (16 bit) or True Color (32 bit) setting

Browser

Web browser (Microsoft Internet Explorer 4.0 or later
recommended)

System

System 7.5.1 (System 7.6 or later recommended)

Memory

16 MB (32 MB or more recommended)

Hard disk space

4 MB to install the Reference

CD-ROM drive

Double-speed (quad-speed or faster
recommended)

Display

Color monitor with 640 x 480 pixel resolution or
greater (thousands of colors recommended)

Browser

Web browser (Microsoft Internet Explorer 4.0 or later
recommended)

Summary of Contents for EPL-N4000+


















































































Search results

Summary of Contents for EPL-N4000+

Reviews:

Related manuals for EPL-N4000+

Brands by name

Popular brands

Epson EPL-N4000+, Setup Manual

Search results

Summary of Contents for EPL-N4000+

Reviews:

Related manuals for EPL-N4000+

Brands by name

Popular brands