Epson EPL-N2750, Reference Manual

Page: 58 / 315

Functions of the Control Panel
3-25
Toner
Displays the amount of toner left in the imaging cartridge as
shown below:
Toner Out
Printing automatically stops when the
Toner Out
error message
appears. You can continue to print by pressing the Continue
button for every page that you want to print. However, this
procedure can be circumvented by setting
Toner Out
to
Continue
.
When set to
Continue
, the printer continues to print and does not
display the
Toner Out
error message on the LCD panel although
the imaging cartridge is out of toner. It is recommended that you
set to
Stop
when you cannot check the printouts on the spot.
Multibin
Selects the mode setting for the optional 5-Bin or 10-Bin Multi-
Purpose Units. If you want to change the settings for a multibin
unit, always consult your printer’s administrator and inform all
other users to avoid confusion. Changing these settings often is
not recommended.
Note:
❏
To make the new settings effective, press the Continue and
SelecType
buttons simultaneously until
Reset All
appears on
the LCD panel. Alternatively, turn off the printer, then after 5
seconds, turn it back on.
❏
Resetting the printer erases all print jobs. Make sure the On Line
light is not flashing when you reset the printer.
E**** F (100-75%)
E*** F (75-50%)
E** F (50-25%)
E* F (25-0%)
E F (0%)