Epson EPL-N2750, Reference Manual

Page: 69 / 315

3-36
Functions of the Control Panel
Form
Selects the number of lines for the selected paper size and
orientation. This also causes a line spacing (VMI) change, and the
new VMI value is stored in the printer. This means that later
changes in the
Page Size
or the
Orientation
settings cause
changes in the Form value, based on the stored VMI.
Source SymSet, Dest SymSet
Available only in certain locations where printers are sold with a
special ROM module installed to handle specific languages.
Tray Assign
Changes the assignment for the paper source select command.
When
4
is selected, the commands are set as compatible with the
HP LaserJet 4. When
4K
is selected, the commands are set as
compatible with the HP LaserJet 4000, 5000, and 8000. When
5S
is
selected, the commands are set as compatible with the HP LaserJet
5Si.
GL2 Menu
This menu lets you set the printer to emulate a plotter, allowing
you to use software which requires a plotter for output. The
LJ4GL2
mode is similar to the GL/2 mode supported in HP
LaserJet 4 mode. The
GLlike
mode emulates some of the HP-GL
plotter commands and includes all the commands found in HP’s
GL/2 mode, as well as two additional commands.
Item Values (default in bold)
GL Mode LJ4GL2 , GLlike
Scale Off , A0, A1, A2, A3
Origin Corner , Center
Pen Pen0 , Pen1, Pen2, Pen3, Pen4, Pen5, Pen6