Epson EPL-N2550 User Manual Download Page 50

Page: 50 / 339

Paper Handling

Output tray

The face-down tray is located on the top of the printer. Your
printouts will be stacked facing down.

You can use the face-down tray with the following types of paper.

When printing on B4 or larger size paper, pull out the paper
support to prevent your printouts from slipping off the printer.

Printing on Special Media

You can print on special media such as thick paper, envelopes,
transparencies, and labels.

Paper type:

All types of paper that are supported can be used.

Capacity:

Up to 250 sheets of plain paper

Summary of Contents for EPL-N2550




















































































































































































































































































































































Search results

Summary of Contents for EPL-N2550

Reviews:

Related manuals for EPL-N2550

Brands by name

Popular brands

Epson EPL-N2550, User Manual

Search results

Summary of Contents for EPL-N2550

Reviews:

Related manuals for EPL-N2550

Brands by name

Popular brands