Epson EPL-5800, Service Manual

Page: 87 / 114

EPSON EPL 5800 Revision B
Adjustment Adjustment 89
5.1.3 USB ID Input
EPL-5800 comes with the USB interface as a standard, and the PC connected to the EPL-
5800 via the USB interface identifies the printer by referring to the USB ID information
unique to each printer. Since this USB ID information is stored on EEPROM on the main
controller board of the printer, you have to re-define the ID information when you need to
replace the main board for repair.
The program for USB ID input and a supported operating environment is as follows.
!
Program
EPL5800.EXE
!
Operating environment
"
Supported OS: Windows 95/98
"
Supported I/F: Parallel I/F
PROGRAM SETUP
1. Insert the supplied program diskette labeled as “Disk-1” into a floppy disk drive on the
PC, and execute the program “SETUP.EXE”.
2. Follow the setup instruction displayed on the PC. (replace the floppy disk to “Disk-2”
when you are instructed to do so by the setup program.)
3. When the setup is completed, you can start the program by selecting it from the
Program menu.
PROGRAM OPERATION
1. When you execute the program, the following menu window will appear.
2. Select the printer. (Only one printer: EPL-5800 is listed.)
3. If you need to input new USB ID information to the printer, clcik “USB ID Input”
radio button and click “OK” to proceed.
C A U T I O N When you repair the printer and re-define the USB ID information,
you have to notify it to the user to uninstall a previously installed
printer driver as it is referring to an old USB ID information.