Epson EPL 5800 - B/W Laser Printer Reference Manual Download Page 12

Page: 12 / 163

Getting Started

❏

Be sure to keep the consumable components out of the reach
of children.

❏

Do not leave jammed paper in the printer. It can cause the
printer to overheat.

❏

Avoid using outlets that other appliances are plugged into.

❏

Use only an outlet that meets the power requirements of this
printer.

Power On/Off Cautions

Caution:

Do not turn off the printer:

❏

For at least 22 seconds after turning on the printer. Wait
until the

Ready

(green) light comes on and is not flashing.

❏

While the

Ready

(green) light is flashing.

❏

While printing.

Summary of Contents for EPL 5800 - B/W Laser Printer




































































































































































Search results

Summary of Contents for EPL 5800 - B/W Laser Printer

Reviews:

Related manuals for EPL 5800 - B/W Laser Printer

Brands by name

Popular brands

Epson EPL 5800 - B/W Laser Printer, Reference Manual

Search results

Summary of Contents for EPL 5800 - B/W Laser Printer

Reviews:

Related manuals for EPL 5800 - B/W Laser Printer

Brands by name

Popular brands