manualshive.com logo in svg

Epson EPL-5700, Reference Manual

Share
Download
Epson EPL-5700 Reference Manual Download Page 2

Supplement

This supplement includes update information for the EPL-5700.

Installing the Printer Driver

Please change the first sentence of step 6 at page 13 of your

Getting Ready! manual.

Replace:

If you inserted the CD-ROM in drive D, click OK.

With:

In you inserted the CD-ROM in drive D, type D: \ WIN95 and

click OK.

lnstalling Screen fonts

Follow these steps to install the screen fonts:

1. Make sure Windows is running and the printer is turned off.
2. Insert the CD-ROM that comes with your printer into your

CD-ROM drive D(or E).

3. If you are using Windows 3.1, Windows 3.11 for Workgroups

or Windows NT 3.51, make sure the Program Manager

window is open; then choose 

Run 

on the File menu. If you

are using Windows 95, or Windows NT 4.0, click Start, then

choose

 Run,

4. Type 

D:\EPSETUP 

(or 

E:\EPSETUP); 

then click OK.

Copyright   1998 by SEIKO EPSON CORPORATION, Nagano,
Japan

40008983

M01-00

Summary of Contents for EPL-5700






























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands