Using the ECP mode in Windows 95
To use the ECP mode with a Parallel (IEEE 1284-B compliant) connector,
your computer must support the ECP mode.
Note:
The ECP mode is not available with Windows 3.1, 3.11 for Workgroups,
Windows NT 3.51 and NT4.0.
To use the ECP mode, follow these steps:
1.
Make the ECP mode settings in the BIOS setting program that comes
with your computer. (For details of the settings and the program, see
your computer’s manual.)
2.
Click the
Start
button, point to
Settings
, and then click
Control Panel
.
3.
Right-click the
System
icon, and click
Open
in the menu that appears.
4.
Select the
Device Manager
tab.
5.
Select the
ECP Printer Port
under Ports [COM & LPT], then click the
Properties
button.
6.
Select the
Resources
tab.
7.
Make the appropriate setting in the Resource settings dialog box. (This
setting depends on your computer system. For details, see your
computer manual.)
8.
Click
OK
to save the settings.
R
Ktwk Rev.C
A5 size
Appendix A
97/12/26
pass 0
Technical Specifications
A-11
Summary of Contents for EPL-5700
