Connecting the projector to a computer - 33
Connecting up the mouse (wireless mouse function)
This enables the computer’s mouse pointer to be operated with the remote control in the same
way as a wireless mouse.
Connect the projector’s Mouse/Com Port to the computer’s mouse port with the mouse cable
and Main Cable.
Refer to the above table before making your selection.
Point
· Only the USB standard mounted model supports USB Mouse Cable connections. In the
case of Windows, only the Windows 98/2000 preinstalled model is supported. Operations
cannot be guaranteed on upgraded Windows 98/2000 environments.
· Only a computer mouse connected to the mouse/com port can be used.
· The mouse cannot be used when the effect function is in progress.
· There are cases where the computer must be set up. Refer to the instruction manual for
the computer for further details.
· Switch off the power to the projector and computer before making the connection.
· It is necessary to reboot the computer if it does not work.
Computer
Mouse to use
Mouse cable to use
PC/AT
DOS/V
PS mouse
PS/2 mouse cable (supplied)
Serial mouse
Serial mouse cable (supplied)
USB mouse
USB mouse cable (supplied)
Macintosh
Macintosh mouse
MAC mouse cable (supplied)
USB mouse
USB mouse cable (supplied)
Mouse cable
Mouse/COM Port
Main Cable
(supplied with the projector)
PS/2 Connection
Mause Port
Mouse Cable
(supplied with the projector)