Epson EMP-260 User Manual Download

Page: 46 / 78

Appendices

This chapter provides information on maintenance procedures to ensure the best level of performance from the
projector for a long time to come

Installation Methods................................................. 47
Cleaning .................................................................... 48

• Cleaning the Projector's Surface............................................ 48
• Cleaning the Lens Cover Glass............................................... 48
• Cleaning the Air Filter and Air Intake Vent......................... 48

Replacing Consumables.......................................... 51

• Replacing the Remote Control Batteries ............................... 51
• Replacing the Lamp................................................................. 52

Lamp replacement period ...............................................................52
How to replace the lamp.................................................................53
Resetting the lamp operating time..................................................55

• Replacing the Air Filter........................................................... 56

Air filter replacement period ..........................................................56
How to replace the air filter............................................................56
Reset Air Filter Time......................................................................57

Saving a User's Logo ............................................... 58
Screen Size and Distance........................................ 60

• EMP-280 ................................................................................... 60
• EMP-260 ................................................................................... 61

Connecting to External Equipment ........................ 62

• Connecting to an External Monitor ....................................... 62

Connecting a USB Cable (EMP-260 Only).............. 63
Optional Accessories and Consumables............... 64

Optional accessories .......................................................................64
Consumables ..................................................................................64

Glossary ....................................................................65
ESC/VP21 Commands ..............................................67

• Command List .......................................................................... 67
• Cable Layouts ........................................................................... 67

Serial connection (EMP-280 Only) ............................................... 67
Connecting a USB (EMP-260 Only) ............................................. 68

• USB Connection Setup.............................................................68

PJLink (EMP-280 Only).............................................69

Non-compatible commands ........................................................... 69
Input names defined by PJLink and corresponding projector

connectors.................................................................................. 69

Manufacturer name displayed for "Manufacture name

information query" .................................................................... 69

Model name displayed for "Product name information query" ..... 69

List of Supported Monitor Displays ........................70

Computer image............................................................................. 70
Component Video .......................................................................... 70
Composite video/S-video............................................................... 70

Specifications ...........................................................71
Appearance ...............................................................75
Index ..........................................................................76

Summary of Contents for EMP-260















































































Search results

Summary of Contents for EMP-260

Reviews:

Related manuals for EMP-260

Brands by name

Popular brands

Epson EMP-260, User Manual

Search results

Summary of Contents for EMP-260

Reviews:

Related manuals for EMP-260

Brands by name

Popular brands