List of Functions
27
Settings Menu
Sub Menu
Function
Keystone
You can correct vertical keystone distortion in images.
s
Quick Start Guide
Zoom
(EMP-260 only)
Adjusts the image size.
s
Quick Start Guide
Wide: Larger Tele: Smaller
Operation Lock
You can use this to restrict operation of the projector's control panel.
Brightness Control
You can set the lamp brightness to one of two settings.
Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When "Low" is
selected, the amount of electricity consumed and the lamp's operating life are changed as follows, and fan rotation noise during projection is
reduced. Electrical consumption: about a 40 W decrease, lamp life: about 1.3 times longer
Volume
You can adjust the volume.
Remote Receiver
You can limit the reception of the operation signal from the remote control.
When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it , you can make settings to
deactivate the remote receiver that you do not want to use or that is experiencing interference.
Test Pattern
When the projector is setup, a test pattern is displayed so that you can adjust the projection without connecting other equipment. While the test
pattern is displayed you can perform zoom adjustments, focus adjustments, and keystone correction.
To cancel the test pattern, press the [Esc] button on the remote control or the control panel.
Reset
You can reset all adjustment values in the "Settings" menu to their default settings.
To return all menu items to their default settings, see
For EMP-260
For EMP-280
Summary of Contents for EMP-260
Page 1: ...1 User s Guide ...
