background image

ISSUED: 01-23-07  SHEET #:055-9498-2  05-29-08

Visit the Peerless Web Site at www.peerlessmounts.com

2 of 10

For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

Table of Contents

Parts List .............................................................................................................................................................................. 3

Installation to Extension Column ........................................................................................................................................... 4

Installation to Wood Joist Ceilings ........................................................................................................................................ 5

Installation to Concrete Ceilings ............................................................................................................................................ 6

Flush Mount Application ....................................................................................................................................................... 7

Attaching Adapter Plate to Projector .................................................................................................................................. 7-8

Attaching Adapter Plate to Projector Mount .......................................................................................................................... 8

Projector Alignment and Accessories ................................................................................................................................... 9

Warranty Information ........................................................................................................................................................... 10

Tools Needed for Assembly

stud finder ("edge to edge" stud finder is recommended)

phillips screwdriver

drill

1/4" bit for concrete surface

5/32" bit for wood joist

NOTE:

 Read entire instruction sheet before you start installation and assembly.

• Do not begin to install your product until you have read and understood the instructions and warnings contained in this

Installation Sheet. If you have any questions regarding any of the instructions or warnings, call Peerless customer care
at 1-800-729-0307.

• This product should only be installed by someone of good mechanical aptitude, has experience with basic building

construction, and fully understands these instructions.

• Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard-

ware and components.

• Never exceed the Maximum UL Load Capacity.

• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal

injury.

• Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding

power. See suggested torque values where applicable within these instructions.

• When installing or adjusting the ceiling mount, do not  use adhesives, lubricants, or oils, to prevent the screws from

loosening. If you use adhesives, lubricants, or oils to prevent the screws from loosening, the casing may crack and the
projector may fall, causing serious injury and damage to the projector.

WARNING

Summary of Contents for ELPMBPJF











Reviews: