Epson ELPHC100, User Manual

Page: 31 / 132

31
Connecting and Using Other
Components
To extend the capabilities of your Ensemble HD system, you can add on a variety of audio and video
components. You can connect up to a total of five external video devices to the Ensemble HD system, such as a
cable box or satellite receiver. You can also connect an external audio device, such as a CD player or tape deck.
If you want to connect your own amplifier or sound system, a two-channel (stereo) analog audio output port is
provided.
See these sections:
• “Connecting Video Equipment” on page 32
• “Connecting Audio Equipment” on page 36
• “Setting Up the Remote Control” on page 36
• “Using the Remote Control to Operate Your Equipment” on page 39
Note
To temporarily connect a personal MP3 player, such as an iPod, use the
Audio 2
port located on the front of the
AV controller. See page 28.
If desired, you can connect an IR blaster to the
IR OUT
port to relay signals to your components (such as a cable box or
satellite receiver), or use an RF base station. See “Using an RF Base Station” on page 81.