Epson ELPHC100, User Manual

Page: 36 / 132

36
Connecting Audio Equipment
You can connect an external audio device, such as a CD player or tape deck, to the Ensemble HD system. Use
an RCA-style stereo cable and connect your equipment’s audio output port to the
AUDIO 1
port on the back of
the AV controller, as shown below:
To record from the AV controller to your tape deck, connect the audio input port on your tape deck to the
2CH OUT
port, shown above. If you’re not using a tape deck, you can use this port to connect the
Ensemble HD system to an external amplifier or other home audio system.
Note
The
2CH OUT
port is intended for use as a pass-through port. You cannot use the Ensemble HD system to control the
volume of the audio signal transmitted through this port.
Setting Up the Remote Control
After connecting a new component, you can continue to use its original remote control. However, it may be
more convenient to set up the Ensemble HD remote control to work with it. That way, you only need to use
one remote control.
You enable the Ensemble HD remote control to recognize the new component by entering a setup code as
described on page 37. This creates the appropriate commands for your device in one of the remote control
menus listed below:
Component Remote control menu name
Cable box CABLE
Satellite receiver SAT
High-definition DVD player HD
Digital video recorder (for example, TiVo) DVR
Video game console AUX
Video cassette recorder VIDEO
AUDIO 1 IN port 2CH OUT port