32
Configuration Menu Functions
This adjusts the images if vertical stripes appear in the images.
This adjusts the images if flickering, fuzziness or interference appear in the images.
• Flickering and fuzziness may also occur when the brightness, contrast and sharpness settings are adjusted.
• Clearer adjustments can be obtained if you adjust the "Tracking" first and then adjust the "Sync".
(Setting is not possible when signals are being input from the [HDMI1] /[HDMI2] input port.)
When part of the image is clipped, move the image display position vertically and horizontally so that the
entire image is projected. Press
,
,
and
to adjust the position.
(Setting is not possible when "4-4 pull-down" is set to "On". And this can be set only when signals are
being input from the [Video] / [S-Video] input port, or 480i, 576i, 1080i signals are being input from the
[Component] / [HDMI1] / [HDMI2] input port.)
Interlace (i) signals are converted to progressive (p) signals using a method appropriate for the image.
• Video:
This is ideal for general video images.
• Film:
This is ideal for film images. Select this if the setting is "Auto" and flickering appears in the
film images.
• Auto:
Optimum conversion is performed for movie, computer graphics, and animation input signals.
Setting is not possible when "4-4 pull-down" is set to "On". Set to "Off" if noise occurs at the "Low",
"Normal" or "High" setting. The current and previous frames are compared, and the frame in the middle
of them is interpolated to reduce fuzziness and to produce clearer moving images. The degree of
interpolation can be set to "Low", "Normal" or "High" as desired.
(This setting can be made only when 480i, 1080i/60Hz or 1080p/24Hz signals are being input to the
[Component], [HDMI1] or [HDMI2] input ports or when NTSC, M-PAL or PAL60 signals are being
input to the [Video] or [S-Video] input ports.) You can select whether images are projected with the 4-4
pull-down or the 2-3 pull-down. The default setting is different depending on the input signals. When set
to "On", images are projected with 4-4 Pull-down. However, set to "Off" if the projection images are not
smooth when signals other than 1080p/24Hz are being input.
This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts
images to their optimum condition when the input signal is changed. The three automatically adjusted
items are "Tracking", "Position" and "Sync."
(Setting is not possible when "Color Mode" is set to "x.v. Color.")
This reduces flickering of images.
Three modes are available. Select the mode to suit your liking.
Set "Off" when the image source, such as DVD, contains little electrical interference
Displayed for input sources other than computer image
Only displayed for Computer image input (does not appear when signals from the [HDMI1] /[HDMI2] input port are being input)
Tracking
*1
Sync.
*1
Position
*1
Progressive
*1
Frame Interpolation
4-4 Pull-down
Auto Setup
Advanced
Noise Reduction
*1
*1 The setting values are stored separately for each image source and signal type.
Summary of Contents for EH-TW5500
Page 1: ......
