background image

47

Maintenance

Appendix

Consumable replacement periods

Air filter replacement period

• If the air filter has been broken or the "Replace" message is displayed even though the

air filter has been cleaned.

Replace with an optional air filter. 

Replacing the air filter p.48

Lamp replacement period

• The message "Replace the lamp." appears on the screen when projection starts.

• The projected images get darker or start to deteriorate.

The replacement warning message is set to appear after a minimum of about 3900 
hours of lamp use in order to maintain the initial brightness and quality of the 
projected images. The time taken for the message to appear will vary depending on 
usage conditions such as Color Mode settings.
If you continue to use the lamp after this period, the possibility of the lamp breaking 
becomes greater. When the lamp replacement message appears, replace the lamp 
with a new one as soon as possible, even if it is still working.

Depending on the characteristics of the lamp and on the way it has been used, the 
lamp may become darker or stop working before the lamp warning message appears. 
You should always have a spare lamp ready in case it is needed.

Contact your local dealer or the nearest address provided in the 

Epson Projector 

Contact List

.

A message will be displayed.

TIP

Summary of Contents for EH-TW5500






























































Reviews: