Epson EH-TW5200, User Manual

Page: 31 / 86

Adjusting the Image
30
Mode Application
3D Dynamic For use when projecting 3D images. Images are bright and sharper than 3D Cinema.
3D Cinema For use when projecting 3D images.
Switching the Screen Between Full and Zoom (Aspect)
You can change the input signal's type, aspect ratio, and resolution to match the Aspect of the projection
screen.
The available Aspect varies depending on the image signal currently being projected.
a
Press the button.
c
You can make settings from the
Configuration menu.
s
Signal -
Aspect p.47
b
Use the buttons to
select the setting name, and then
press the
button to confirm the
selection.
c
Aspect may not be available
depending on the type of signal.
By normally selecting Auto, the optimum aspect is used to display the input signal. Change the setting if you
want to use a different aspect.
The table below shows the image projected on a 16:9 screen.
Input Image Setting Name (Aspect)
Normal Full Zoom
4:3 Images
16:9 Images When projecting 16:9 images, Full and Zoom cannot be
selected.
Images Recorded Using
Squeeze
Letterbox Images
*