Epson EH-LS800B User Manual Download

Page: 18 / 123

Projector Placement

Warning

• Do not cover the projector's air intake or air exhaust vents. If the vents are

covered, the internal temperature could rise and cause a fire.

• Do not use or store the projector in locations where it will be subject to dust or

dirt. Otherwise, the quality of the projected image may decline, or the air filter

may become clogged, resulting in a malfunction or fire.

• Do not install the projector on an unstable surface or in a location beyond the

weight specifications of the projector. Otherwise, it could fall or topple causing

an accident and injury.

• When installing the projector in a high position, take measures to prevent falling

by using wires to ensure safety in an emergency, such as an earthquake, and to

prevent accidents. If it is not installed correctly, it could fall causing an accident

and injury.

• Do not install in locations where salt damage could occur, or in locations subject

to corrosive gas such as sulphuric gas from hot springs. Otherwise, corrosion

could cause the projector to fall. It could also cause the projector to malfunction.

Attention

• If you are using the projector at altitudes above 1,500 m, set the High Altitude

Mode setting to On in the projector's menu to ensure the projector's internal

temperature is regulated properly.

• Try not to setup the projector in locations subject to high humidity and dust, or

in locations subject to smoke from fires or tobacco smoke.

p.18

• "Precautions on Installation"

p.19

• "Screen Size and Projection Distance"

p.111

• "Projector Installation Settings - Installation Menu"

p.80

• "Projector Feature Settings - Settings Menu"

p.81

• "Changing the Image Size or Position (Flexible Picture)"

p.63

• "Focusing the Image Using the Focus Lever"

p.40

Projector Setup and Installation Options

You can set up or install your projector in the following ways:
Front/Rear

Front Upside Down/Rear Upside Down

• The default Projection setting is Front.

Related Links

• "Projection Modes"

p.38

Summary of Contents for EH-LS800B




























































































































Search results

Summary of Contents for EH-LS800B

Reviews:

Related manuals for EH-LS800B

Brands by name

Popular brands

Epson EH-LS800B, User Manual

Search results

Summary of Contents for EH-LS800B

Reviews:

Related manuals for EH-LS800B

Brands by name

Popular brands