Epson EF11 User Manual Download Page 133 | Manualshive

Page: 133 / 138

background image

133

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

WARNING

The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC
Certification or Declaration of this device and may cause interference levels which exceed the limits
established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded
equipment interface cable with this device. If this equipment has more than one interface connector, do
not leave cables connected to unused interfaces. Changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment.

For Canadian Users

CAN ICES-3(B)/NMB-3(B)

Parent topic:

«
...
131
132
133
134
135
...
»

Summary of Contents for EF11











































































































































Reviews:

No comments

Related manuals for EF11

Brand: Panasonic Pages: 104

Brand: Panasonic Pages: 56

Brand: NEC Pages: 64

Brand: NEC Pages: 6

Brand: Marantz Pages: 2

Brand: Digital Projection Pages: 58

Brand: Goclever Pages: 62

Brand: FujiFilm Pages: 20

Brand: Remaco Pages: 4

Innovate iPJ-AW250NM

Brand: Hitachi Pages: 3

Brand: Hitachi Pages: 10

Brand: Hitachi Pages: 22

Innovate iPJ-AW250NM

Brand: Hitachi Pages: 92

Innovate ED-X50

Brand: Hitachi Pages: 2

Brand: Hitachi Pages: 115

Brand: Hitachi Pages: 120

Brand: Hitachi Pages: 153

Innovate iPJ-AW250NM

Brand: Hitachi Pages: 303

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands