Related Information
&
Making Settings to Receive Faxes Operating Only a Connected Phone
You can start receiving incoming faxes by only picking up the handset and operating the phone, without operating
the printer at all.
The
Remote Receive
feature is available for telephones that support tone dialing.
1.
Select
Settings
on the home screen on the printer's control panel.
2.
Select
General Settings
>
Fax Settings
>
Basic Settings
>
Remote Receive
.
3.
Tap
Remote Receive
to set this to
On
.
4.
Select
Start Code
, enter a two digit code (you can enter 0 to 9, *, and #), and then tap
OK
.
5.
Select
OK
to apply the settings.
Related Information
&
Making Settings to Save and Forward Received Faxes
The printer is set to print received faxes by default. Besides printing, you can set the printer to save and/or forward
received faxes without conditions.
Note:
❏
As well as using the printer's control panel, you can also make settings using Web Config.
❏
You can also save and/or forward received faxes with conditions.
“Making Settings to Save and Forward Received Faxes with Specific Conditions” on page 418
Related Information
&
“Making Saving Settings to Receive Faxes” on page 415
&
“Making Forwarding Settings to Receive Faxes” on page 417
Making Saving Settings to Receive Faxes
You can make saving settings to receive faxes to the inbox and an external memory device regardless of the sender
or time. Saving a fax to the inbox allows you to confirm the contents of the received fax by viewing the fax on the
printer's LCD screen before the printer prints the fax.
To make settings to save received faxes to a computer using the PC-FAX feature, see
>
>
415