49
Note:
If you have already connected devices or computers to your product via Wi-Fi Direct, they
will be disconnected when you change the frequency range. You cannot re-connect from devices
that do not support 5 GHz frequency range when changing to 5 GHz.
• To restore all Wi-Fi Direct settings to their factory defaults, select
Restore Default Settings
and
press the
OK
button.
Parent topic:
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note:
To check if your router is WPS-enabled, look for a button labeled
WPS
on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic:
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1.
Press the
WPS
button on your router.
2.
From the home screen, select
Wi-Fi Setup
and press the
OK
button.
You see this screen:
Summary of Contents for EC-C110
Page 1: ...EC C110 User s Guide ...
Page 2: ......
Page 10: ......
Page 23: ...23 3 Remove the rear cover as shown ...
