Epson EB-W70 User Manual Download

Page: 78 / 99

Solving Image Problems

Check the solutions in these sections if you have any problems with projected

images.

Related Links

• "Solving Missing Image Problems"

p.78

• "Adjusting an Image that is not Rectangular"

p.78

• "Adjusting a Fuzzy or Blurry Image"

p.79

• "Fixing Partial Image Problems"

p.79

• "Adjusting an Image that Contains Noise or Static"

p.79

• "Adjusting an Image with Incorrect Brightness or Colors"

p.80

• "Adjusting an Upside-down Image"

p.80

Solving Missing Image Problems

If no image is displayed, try the following steps until the problem is solved.

Check the projector's status:

• Press the

button on the remote control to see if the image was

temporarily turned off.

• Check the status indicator to confirm that the projector is in normal

operating status.

• Press the projector's power button to wake it from standby or sleep

mode. Also, check if the connected computer is in sleep mode or

displaying a blank screen saver.

Settings > Operation > Sleep Mode

Check the cable connection:
• Make sure all necessary cables are securely connected and the power

is on for the projector.

• Connect the video source directly to the projector.
• Replace the HDMI cable with the shorter one.

Check the status of your video source:
• If you are projecting from a streaming media player, make sure it is

• Turn on the connected streaming media player or video source, and

press the play button to start a video, if necessary.

• Make sure the connected device meets the HDMI CEC standard. See

the documentation supplied with the device for more information.

• If you are projecting from a laptop computer, make sure it is set up

to display on an external monitor.

Check the following items:
• Turn off the projector and the connected streaming media player or

video source, and then turn them back on.

• Set the CEC function for the connected device again and restart the

device.

• Make sure the computer's display resolution does not exceed the

projector's resolution and frequency limits. If necessary, select a

different display resolution for your computer. (See your computer

manual for details.)

• Resets all of the projector settings to their default values.

Reset > Reset All Config

p.61

• "Projector Reset Options - Reset Menu"

p.66

Adjusting an Image that is not Rectangular

If the projected image is not evenly rectangular, try the following steps until

the problem is solved.

Place the projector directly in front of the center of the screen, facing it

squarely, if possible.

Summary of Contents for EB-W70




































































































Search results

Summary of Contents for EB-W70

Reviews:

Related manuals for EB-W70

Brands by name

Popular brands

Epson EB-W70, User Manual

Search results

Summary of Contents for EB-W70

Reviews:

Related manuals for EB-W70

Brands by name

Popular brands