PC Free operating methods
Although the following steps are explained based on the remote control,
you can perform the same operations from the control panel.
Starting PC Free
a
Change the source to USB.
s
"Switching to the Target Image by Remote Control"
b
Connect the USB storage device to the projector.
s
PC Free starts and the file list screen is displayed.
•
The following files are displayed as thumbnails (file contents are
displayed as small images).
- JPEG files
- AVI files (displays the image at the start of the movie)
•
Other files or folders are displayed as icons as shown in the
following table.
Icon
File
Icon
File
JPEG files
*
BMP files
GIF files
PNG files
AVI (Motion JPEG)
files
*
*
When it cannot be displayed as a thumbnail, it is displayed as an icon.
a
•
You can also insert a memory card into a USB card reader and then
connect the reader to the projector. However, some commercially
available USB card readers may not be compatible with the
projector.
•
If the following screen (Select Drive screen) is displayed, press the
[
], [
], [ ], or [ ] buttons to select the drive you want to
use, and then press the [
] button.
•
To display the Select Drive screen, position the cursor on
Select
Drive
at the top of the file list screen, and then press the [
]
button.
Projection Functions
49
Summary of Contents for EB-S03
