Switching to the Target Image by Remote Control
You can change directly to the target image by pressing the following
buttons on the remote control.
Remote control
A
Switches to images from the Computer port.
B
Each time the button is pressed, it cycles through the images being input
from the following sources.
•
S-Video port
•
Video port
•
HDMI port
C
Each time the button is pressed, it cycles through the images being input
from the following sources.
•
USB Display
•
Images from the device connected to the USB-A port
D
Switches to the image from the network connected device.
Projecting with USB Display
You can use a USB cable to connect the projector to a computer to project
images from the computer.
You can project images and send audio with one USB cable.
To start USB Display, set
USB Type B
to
USB Display
from the
Configuration menu.
s
Extended
-
USB Type B
System requirements
For Windows
OS
Windows 2000
*
1
Windows XP
*
2
Professional 32bit
Home Edition 32bit
Tablet PC Edition 32bit
Windows Vista
Ultimate 32bit
Enterprise 32bit
Business 32bit
Home Premium 32bit
Home Basic 32bit
Windows 7
Ultimate 32/64bit
Enterprise 32/64bit
Professional 32/64bit
Home Premium 32/64bit
Home Basic 32bit
Starter 32bit
Windows 8
Windows 8 32/64 bit
Windows 8 Pro 32/64 bit
Windows 8 Enterprise 32/64 bit
Projecting Images
32
Summary of Contents for EB-S03
