Epson EB-PU1006W User Manual Download

Page: 113 / 191

Reset Menu

113

Settings on the

Reset

menu let you reset certain projector settings to their

default values.

Related Links

• "Reset All Memories"

p.113

• "Refresh Mode"

p.113

• "Light Source Calibration"

• "NFC Settings"

• "Reset All (Factory Default)"

p.114

Reset All Memories

Reset

Reset All Memories

You can delete all memories saved in

Memory

Lens Position

, and

Geometry

Correction

Refresh Mode

Reset

Refresh Mode

The refresh mode process clears any projected afterimage and turns off the

projector after a specified period of time.

Timer

Set a time period during which the projector displays the refresh image.

Messages

Set to

to display a message informing you that the projector is in

refresh mode.

Start

Starts the refresh mode process to clear any projected afterimage and turn

off the projector after a specified period of time. Press any button on the

remote control to cancel this process.

Light Source Calibration

Reset

Light Source Calibration

The light source calibration process optimizes the color balance of the

currently projected image.

Run Now

Starts light source calibration to optimize the color balance of the currently

projected image. You may not be able to start calibration if the projector's

environmental temperature is out of range. (Wait 30 minutes after turning

on the projector before starting calibration for the best results.)

Light Source Calibration

does not start in the following cases.

• If the projector is not used continuously for more than 20 minutes.
• If the surrounding temperature gets too high, and the brightness has

been automatically dimmed.

• If you use the following functions and the brightness of the light source

declines to a specific level or lower.
• Dynamic Contrast

• Lights-Out Control

• A/V Mute

• Within 10 minutes of turning on the projector.
• If

Brightness Settings

is set to 30% or less.

Run Periodically

Set to

to perform light source calibration periodically every 100 hours

of usage.
When set to

Off

to maintain the projected image that has been adjusted

using Multi-Projection, perform calibration using

Run Now

or set a

Light

Source Calibration

event to perform it periodically on the

Schedule

Settings

screen.

Schedule Settings

Displays the

Schedule Settings

screen. Set a

Light Source Calibration

event to run periodically.

Last Run

Displays the date and time of the last light source calibration.

Summary of Contents for EB-PU1006W
































































































































































































Search results

Summary of Contents for EB-PU1006W

Reviews:

Related manuals for EB-PU1006W

Brands by name

Popular brands

Epson EB-PU1006W, User Manual

Search results

Summary of Contents for EB-PU1006W

Reviews:

Related manuals for EB-PU1006W

Brands by name

Popular brands