Submenu
Function
Projection
Select from one of the following projection methods
depending on how the projector is installed.
Front
,
Front/Ceiling
,
Rear
, and
Rear/Ceiling
You can change the setting as follows by pressing down
the [A/V Mute] button on the remote control for about five
seconds.
Front
W
Front/Ceiling
Rear
W
Rear/Ceiling
s
"Installation Methods"
p.22
Operation
Direct Power On
: Set to
On
to turn on the projector
simply by plugging it in.
When the power cord is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
High Altitude Mode
: Set to
On
when using the projector
above an altitude of 1500 m.
Startup Source Search
: Set to
On
to project images from
the port currently receiving an image when the projector
starts.
Submenu
Function
A/V Settings
A/V Output
: (This item can be set only if
Standby Mode
is
set to
Communication On
.)
When the projector is in standby status, set to
Always On
in the following situations.
•
When outputting audio and images to external equipment.
•
When outputting audio from the microphone to the
projector's speaker.
a
The fan may rotate in standby status. Also,
when the projector wakes from standby
status, the fan may make a loud noise as it
rotates, but this is not a malfunction.
Audio Output
: Select the audio output when projecting
images from the Computer1, Computer2, S-Video, or Video
input ports. When set to
Auto
, the audio from the audio
input port that matches each image input port is output. In
standby status, the audio from the last selected source is
output.
s
"Connecting Equipment"
p.26
HDMI Audio Output
: Select the audio source when
projecting images from the HDMI input port. Select
HDMI
to output the image's audio as it is.
Plug-in Power
: When set to
On
, you can use a microphone
with Plug-in Power support.
Language
You can set the language for messages and menus.
Reset
You can reset the adjustment values for
Display
*
1
,
Operation
*
2
, and
A/V Settings
*
3
from the
Extended
menu
to their default settings.
See the following to return all menu items to their default
settings.
s
"Reset Menu"
p.101
*
1 When
User's Logo Protect
is set to
On
in
Password Protect
, settings related
to user's logo cannot be changed. You can make changes after setting
User's
Logo Protect
to
Off
.
List of Functions
90
Summary of Contents for EB-940
