Epson EB-940, User Manual, Page: 15 / 149

Control Panel
Name Function
A
[Source Search]
button
Changes to the next input source that is sending an image.
s
"Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.36
B
[Enter] button
[ ]
• When the Configuration menu or the Help screen is
displayed, it accepts and enters the current selection and
moves to the next level.
• If pressed while projecting analog RGB signals from the
Computer port, you can automatically optimize
Tracking, Sync., and Position.
C
[
w
][
v
] buttons
• Displays the Keystone screen allowing you to correct
keystone distortion in vertical and horizontal
directions.
s
"Correcting manually" p.42
•
If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s
"Using the Configuration Menu" p.82
s
"Using the Help" p.103
Name Function
D
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur.
s
"Using the Help" p.103
E
[Esc] button
• Stops the current function.
• If pressed when the Configuration menu is displayed, it
moves to the previous menu level.
s
"Using the Configuration Menu" p.82
F
[
a
][
b
] buttons
• Adjusts the volume.
[
a
] Decreases the volume.
[
b
] Increases the volume.
s
"Adjusting the Volume" p.46
• Corrects keystone distortion in the horizontal direction
when the Keystone screen is displayed.
s
"H/V-Keystone" p.43
• If pressed when the Configuration menu or the Help
screen is displayed, these buttons select menu items and
setting values.
s
"Using the Configuration Menu" p.82
s
"Using the Help" p.103
G
[Menu] button
Displays and closes the Configuration menu.
s
"Using the Configuration Menu" p.82
H
Power button
[
t
]
Turns the projector power on or off.
s
"From Installation to Projection" p.35
I
Indicators
Indicates the projector's status.
s
"Reading the Indicators" p.104
Part Names and Functions
15