a
Press the [Menu] button.
s
"Using the Configuration Menu"
p.82
Using the remote control
Using the control panel
b
Select
Auto Iris
from
Image
.
c
Select
Normal
or
High Speed
.
The setting is stored for each Color Mode.
a
When set to
High Speed
, the brightness of the image is
adjusted as soon as the scene changes.
d
Press the [Menu] button to finish making settings.
a
Auto Iris can only be set when the
Color Mode
is
Dynamic
or
Theatre
.
Changing the Aspect Ratio of the Projected Image
You can change the Aspect Ratio
g
of the projected image to suit the type,
the ratio of height and width, and the resolution of the input signals.
Available aspect modes vary depending on the image signal currently being
projected.
Changing methods
Each time you press the [Aspect] button on the remote control, the aspect
mode name is displayed on the screen and the aspect ratio changes.
Remote control
a
You can set the aspect ratio from the Configuration menu.
s
Signal
-
Aspect
p.86
Adjusting Projected Images
48
Summary of Contents for EB-940
