Others Menu
EB-826W/825/85
EB-84
Sub Menu
Function
Trap IP Address 1
Trap IP Address 2
You can register up to two for the SNMP
trap notification destination.
You can input a number from 0 to 255 in each field of the address.
However, the following IP Addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be managed by a
network administrator.
Priority gateway
(EB-826W/825/85 only)
For the priority gateway, select either wireless or wired.
AMX Device Discovery
When the projector is connected to a network, set this to
On
to allow the projector to be detected by AMX Device Discovery. Set this to
Off
if you
are not connected to an environment controlled with a controller from AMX or AMX Device Discovery.
List of Functions
49
