Epson EB-725Wi User Manual Download Page 294

Page: 294 / 357

294

Note:

Air filters contain polypropylene. Dispose of used air filters according to local regulations.

Place the new air filter in the projector as shown.

Close the air filter cover and slide the latch.

Parent topic:

Air Filter and Vent Maintenance

Related tasks

Turning Off the Projector

Replacing the Remote Control Batteries

The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they
run out.

Caution:

Use only the type of batteries specified in this manual. Do not install batteries of different types,

or mix new and old batteries.

Summary of Contents for EB-725Wi






































































































































































































































































































































































Search results

Summary of Contents for EB-725Wi

Reviews:

Epson EB-725Wi, User Manual, Page: 294 / 357

Search results

Summary of Contents for EB-725Wi

Reviews: