
230
2.
Select the
Interactive
menu and press
Enter
.
3.
Select
Directory
and press
Enter
.
4.
Select the following options as necessary:
•
Directory Access Function
specifies whether to search an active directory server for user names
and email addresses.
•
LDAP Server
let you enter the IP address or fully qualified domain name (FQDN) for the LDAP
server. You can enter up to 64 alphanumeric characters. Do not use spaces or the following
symbols: " * + , : ; < = > ? [ \ ] ` |. If you specify an FQDN, you must configure a DNS server.
Note:
You cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or 224.0.0.0 to
255.255.255.255 (where x is a number from 0 to 255).
•
Port Number
lets you enter a port number for the LDAP server. The default port is 389. Specify
"3268" to search the global catalog.
•
Authentication
lets you set the type of authentication expected by the LDAP server. If you are
using
Digest-MD5
or
Simple
authentication and the
LDAP Server
setting is set to an IP address,
you must enable reverse DNS lookup on the DNS server.
Summary of Contents for EB-725Wi
