Epson EB-725Wi, User Manual, Page: 202 / 357

202
7. Move each marker over the projected cross until the lines of the cross align with the lines on the
marker. Make sure to match the positions so that the crosses overlap with the points on the marker
positions.
Note: If the magnets won't attach to the screen completely, wipe the area to remove any dirt and try
again. For non-magnetic screens, use the supplied tape to secure the markers.
8. Press Enter on the remote control or control panel to begin the auto adjustment.
9. When adjustments are complete, remove the markers.
Note: If auto adjustment fails, follow the instructions on the screen to manually adjust the angle of
the laser and run auto adjustment again.