Epson EB-700U User Manual Download Page 227

Page: 227 / 264

Projector Indicator Status

227

Indicator and status

Problem and solutions

Power: Off
Status: Flashing blue
Laser: Off
Temp: Lit orange

Projector has overheated and turned off. Leave it turned

off to cool down for 5 minutes.
• Make sure that the vents and air filter are not clogged

with dust or obstructed by nearby objects.

• Clean or replace the air filter.
• If operating the projector at high altitude, set the

High

Altitude Mode

setting to

in the projector's

Extended

menu.

Extended

Operation

High Altitude Mode

• If the problem persists, unplug the projector and

contact Epson for help.

Power: Flashing blue
Status: Indicator status

varies
Laser: Flashing orange
Temp: Indicator status

varies

Laser warning.
Turn the projector off, unplug it, and contact Epson for

help.

Power: Off
Status: Flashing blue
Laser: Lit orange
Temp: Off

Laser has a problem.
• Make sure that the vents and air filter are not clogged

with dust or obstructed by nearby objects.

• Clean or replace the air filter.
• If the problem persists, unplug the projector and

contact Epson for help.

Power: Off
Status: Flashing blue
Laser: Off
Temp: Flashing orange

A fan or sensor has a problem. Turn the projector off,

unplug it, and contact Epson for help.

Power: Off
Status: Flashing blue
Laser: Flashing orange
Temp: Off

Internal projector error. Turn the projector off, unplug

it, and contact Epson for help.

Indicator and status

Problem and solutions

Power: Flashing blue
Status: Indicator status

varies
Laser: Flashing orange
Temp: Flashing orange

Obstacle detection warning. A beep sounds, and the

message "For safety purposes remove any obstacles

blocking the lens." is displayed.
• Make sure that there are no obstacles interfering with

the projection window. Remove any obstacles.

• Clean the obstacle sensor if there are no obstacles.
The projector turns off automatically if no action is

taken.

Power: Off
Status: Flashing blue
Laser: Lit orange
Temp: Lit orange

Obstacle detection error. Turn the projector off, unplug

it, and contact Epson for help.

Related Links

• "Cleaning the Air Filter"

p.216

• "Replacing the Air Filter"

p.218

Summary of Contents for EB-700U









































































































































































































































































Search results

Summary of Contents for EB-700U

Reviews:

Brands by name

Popular brands

Epson EB-700U, User Manual

Search results

Summary of Contents for EB-700U

Reviews:

Brands by name

Popular brands