Epson EB-1480Fi, User Manual, Page: 166 / 296

Wireless Network Projection
166
a
If you need to assign the SSID manually, select
SSID
to enter the
SSID.
j
Assign the IP settings for your network as necessary.
• If your network assigns addresses automatically, select
IP Settings
to
set the
DHCP
setting to
On
.
• If you must set addresses manually, select IP Settings to set the
DHCP setting to Off , and then enter the projector's IP Address ,
Subnet Mask , and Gateway Address as necessary.
k
To prevent the IP address from being displayed on the network
information screen, set the
IP Address Display
setting to
Off
.
l
Select the Network Projection menu and press [Enter].
m
Set the
Epson iProjection
setting to
On
.
n
Select the options as necessary.
•
SSID Display
lets you select whether to display projector's SSID on
the network information screen and Home screen.
• Display LAN Info. lets you set the display format for the projector's
network information.
•
Moderator Password
lets you enter a four-digit number password
for accessing the projector as a moderator using Epson iProjection.
(No password is set by default.)
• Projector Keyword lets you turn on a security password to prevent
access to the projector by anyone not in the room with it. You must
enter a displayed, randomized keyword from a computer using
Epson iProjection to access the projector and share the current
screen.
• Keyword Interrupt Display lets you select whether to display a
projector keyword on the projected image when accessing the
projector using Epson iProjection.
o
When you finish selecting settings, go back to the
Network Settings
screen, select
Set
, and follow the on-screen instructions to save your
settings and exit the menus.
p
Press the [LAN] button on the remote control.