Installation Guide
47
d
Adjust the focus to match the focus in the following figure (
)
Open the air filter cover, and then adjust the focus.
s
"Adjusting the Projection Position"
When (
) is in focus, check the (
) areas. If any of the (
) areas are out of focus, adjust the focus
until the (
) areas are uniform.
After you finish making adjustments, close the air filter cover.
e
Press the [Esc] button on the remote control or the control panel to remove the Test Pattern
Calibrating the pen
Check that adjusting the projected image is complete before you start calibrating the interactive pen.
s
"Adjusting the Projected Image"
There are two methods available for calibrating the pen;
Auto Calibration
and
Manual Calibration
. When
calibrating the pen for the first time after installing the projector, perform
Manual Calibration
for optimum
calibration.
For the
Auto Calibration
method, see the projector's
User's Guide
(on the Document CD-ROM).
a
Turn on the projector, and then press the [Menu] button
Using the Remote Control
Using the Control Panel
