Installation Guide
20
: Center of screen
: Top of projector
: Top of Control Pad
: Bottom of Control Pad
: Remote control light-emitting area
Align the top of the projector with the top of the Control Pad, and point the Control Pad's remote control
light-emitting area at the projector.
c
When installing the Touch Unit, do not install the Control Pad on the projection screen and the
surrounding area (shaded area in the following figure) (EB-1430Wi only). The Touch Unit will not
operate correctly.
[Unit: mm]
When Projected Image is Smaller than 75 Inches
Mount the 3-axis adjustment unit at the position marked with a
stamp (
).
The projection distance table provides the figures when mounting the 3-axis adjustment unit at the position
marked with a
stamp (
). The numbers on the arm slide scale (b) differ from the projection distance (a).
The distance (c) from the projected image to the wall plate is the number given when the vertical slide is set
to the standard position (
).
Match the notch on the setting plate to the position of the stamp on the wall plate.
