Epson EasyMP Network Projection Operation Manual Download

Page: 70 / 109

• Check for any obstacles between the access point and the computer or projector, and change their

position to improve communication. Sometimes, indoor environments prevent the projector from
being found in a search.

• Set the radio strength for the network devices to the maximum.

• Set the IP address, the subnet mask, and the gateway address for the access point correctly.

• Check the projector's network settings.

• Set the

Connection Mode

setting to

Advanced

Go to

Network

Network Configuration

Wireless LAN

Connection Mode

• Set the computer, the access point, and the projector to the same SSID.

Go to

Network

Network Configuration

Wireless LAN

SSID

• Set

DHCP

Off

. When

DHCP

is set to

, it may take some time to enter LAN standby status if an

available DHCP server is not found.

Go to

Network

Network Configuration

Wireless LAN

DHCP

Network

Configuration

Wireless LAN

IP Settings

DHCP

• Set the IP address, the subnet mask, and the gateway address for the projector correctly.

• Set

Wireless LAN Power

Go to

Network

Network Configuration

Wireless LAN

Wireless LAN Power

• Set the wireless LAN system to meet the standards supported by the access point.

Go to

Network

Network Configuration

Wireless LAN

Wireless LAN system

Wireless

LAN Sys.

• When you enable the security setting, set the same passphrase to the access point, the computer,

and the projector.

• Close network settings on the projector, and then return to the LAN standby screen.

• Check the computer's network settings.

• If the wireless LAN adapter is not installed on your computer, install a wireless LAN card on your

computer.

• Enable the wireless LAN setting or AirPort on your computer.

• Connect to the access point to which the projector is connected.

• Turn off the firewall. Or register the firewall as an exception. If you do not want to turn it off or

register it as an exception, make the necessary settings to open the ports. The ports used by this
software are "3620", "3621", and "3629".

Summary of Contents for EasyMP Network Projection














































































































Search results

Summary of Contents for EasyMP Network Projection

Reviews:

Related manuals for EasyMP Network Projection

Brands by name

Popular brands

Epson EasyMP Network Projection, Operation Manual

Search results

Summary of Contents for EasyMP Network Projection

Reviews:

Related manuals for EasyMP Network Projection

Brands by name

Popular brands