• If you cannot find the projector you want to connect to using
Automatic search
, select
Manual
search
to specify the IP address.
• Make sure the projector supports the EasyMP Multi PC Projection version being used. Install
EasyMP Multi PC Projection from the EPSON Projector Software CD-ROM supplied with the
projector.
• Install the latest version of EasyMP Multi PC Projection on all computers. The maximum number of
computer connections and the availability of the moderator function varies depending on the
projector model, no matter which version of EasyMP Multi PC Projection you are using.
• When another user is already connected, you can only connect to projectors in the same mirroring
group as that selected by the other user. Select a projector from the same mirroring group as the
user who is already connected, or select a projector that is in standby status.
Parent topic:
Solving Network Connection Problems
Related references
Set options - General settings
Related tasks
Searching for Network Projectors by Specifying an IP Address or Projector Name
Solutions When You Cannot Connect Projectors (Wired)
When you cannot connect the computer and the projector over a wired network, try the following
solutions. If you cannot resolve the problem, contact your network administrator.
• Check the status of the external devices used for the network connection or the environment in which
the network devices and the projector are located.
• Connect the network cable securely.
Note:
• Use a commercially available 100BASE-TX or 10BASE-T LAN cable.
• To prevent malfunctions, use a category 5 or higher shielded LAN cable.
• Check the projector's network settings.
• Set
DHCP
to
Off
. When
DHCP
is set to
On
, it may take some time to enter LAN standby status if an
available DHCP server is not found.
Go to
Network
>
Network Configuration
>
Wired LAN
>
DHCP
or
Network
>
Network
Configuration
>
Wired LAN
>
IP Settings
>
DHCP
.
51
