2.
Connect the computer to the network.
Note:
To set up a network connection, if necessary, see the documentation supplied with your
computer or network adapter.
3.
Connect a LAN cable to the projector.
4.
Turn on the projector.
5.
Press the
Menu
button on the remote control or the control panel, select the
Network
menu, and
select
Network Configuration
.
6.
Select
Wired LAN
.
A screen like one of the following is displayed.
7.
Select IP settings as necessary.
• DHCP is available: Set
DHCP
to
On
.
• DHCP is not available: Set
DHCP
to
Off
and enter the projector's IP Address, Subnet Mask, and
Gateway Address values as necessary.
8.
When you have finished making settings, select
Setup Complete
or
Complete
, and follow the on-
screen instructions to save your settings and exit the menus.
Parent topic:
Related tasks
Connecting to the Projector from the Software over a Network System
17
