Epson dreamio EMP-TW600 User Manual Download | Manualshive

Page: 34 / 60

background image

32

Configuration Menu Functions

A fan is set at a certain speed of rotation so as to bring down internal temperature.
When using above an altitude of about 1500m, set to "On".

You can record your favorite image as a user's logo.
The logo will be projected when projection starts and when using the blank function. When a user's logo
is recorded, the previous user's logo will be erased. Follow the instructions on the screen to record a user's
logo.

• The image will be displayed in dot format while the selection frame is displayed, therefore the display

size may change.

• The size of the recorded image is 400

×

300 dots.

• Once a user's logo has been recorded, you cannot return the logo to the default setting.
• To use the recorded user's logo, set "Display Background" to "Logo".

Press

,

,

and

to specify the position for the menus to be displayed.

This sets whether the navigation bar for the configuration menus is displayed (On) or not displayed (Off).

Selects the colour for the main configuration menu and the navigation bar.

This sets whether the following message displays appear (On) or don't appear (Off).

• Image signal, colour mode, aspect , test pattern and item name when memory settings are retrieved
• Messages such as when no image signals are being input, when an incompatible signal is input, and

when the internal temperature rises

Displays a menu for selecting the screen status for when using the blank function or when no image
signal is input.

This sets whether the start-up screen (the image that is projected when projection starts) is displayed (On)
or not displayed (Off).
If you change the setting, the new setting will take effect after the power has been turned off and the
cool-down period is complete.

High Altitude Mode

User’s Logo

Move the selection frame so that
the area of the image to be
recorded is inside the frame.

Select the display ratio.

Record

Selection

frame

Display

Menu Position

Navigation Bar

Menu Color

• Color 1:Black

• Color 2:Purple

Message

Display Background

Startup Screen

«
...
32
33
34
35
36
...
»

Summary of Contents for dreamio EMP-TW600





























































Reviews:

No comments

Related manuals for dreamio EMP-TW600

MultiSync X462S

Brand: NEC Pages: 2

P42XC10 - PlasmaSync - 42" Plasma Panel

Brand: NEC Pages: 2

Brand: Eahora Pages: 8

Brand: gb PLATINUM Pages: 72

Brand: iHealth Pages: 14

Brand: Planar Pages: 16

Brand: iHealth Pages: 16

VG910B - 19" LCD Monitor

Brand: ViewSonic Pages: 21

Brand: ViewSonic Pages: 25

Brand: OBH Nordica Pages: 60

Brand: ViewEra Pages: 17

Brand: VTech Pages: 2

Brand: Planar Pages: 42

Brand: HANNspree Pages: 22

Brand: Xenarc Pages: 13

Brand: HANNspree Pages: 19

Brand: iProven Pages: 2

Brand: Epson Pages: 117

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands