Epson CW-C4000 Series User Manual Download Page 84

Page: 84 / 90

OT-PT40

OT-PT40 is an paper ejection tray that allows you to temporarily collect printed labels.

OT-PT40 can hold the paper of the following sizes.

Maximum paper size: 105 x 148 mm (width x length)

Minimum paper size: 76 x 54 mm (width x length)

Note

❏

In the case of roll paper, the paper is curled so if multiple labels or sheets are printed and ejected,
they may overflow the tray.

❏

Depending on the printer model, OT-PT40 comes with the printer.

Attach the tray by following the steps below.

Attach the tray by hooking it onto the hooks on the under side of the paper ejection guides.

Pull the lever at the bottom right of the OT-PT40 to release the lock.

CW-C4000 Series User’s Guide

Appendix

Summary of Contents for CW-C4000 Series



























































































Search results

Summary of Contents for CW-C4000 Series

Reviews:

Related manuals for CW-C4000 Series

Brands by name

Popular brands

Epson CW-C4000 Series, User Manual

Search results

Summary of Contents for CW-C4000 Series

Reviews:

Related manuals for CW-C4000 Series

Brands by name

Popular brands