manualshive.com logo in svg

Epson C31C514452, Technical Reference Manual

Share
Download
Epson C31C514452 Technical Reference Manual Download Page 73

Rev. H

Setup   

3-31

TM-U220 Technical Reference Guide

3.4.7.5  Connecting a Drawer 

CAUTION:

Be sure to connect a drawer that meets printer specifications. Connecting a drawer of 
the wrong specifications may result in damage to both the drawer and the printer.  

Never connect the telephone line to the drawer kick connector (labeled “DK”).  Doing 
so may result in damage to both the telephone line and the printer.  

Never connect the drawer cable to the customer display connector (labeled “DM-D”).  
Doing so may result in damage to both the drawer cable and the printer.

1. Connect the drawer cable to the drawer kick connector (labeled “DK”) on the connector 

panel.

Connecting drawer

2. The connecting is finished.

3.5  Install a Printer Driver in the Host PC / POS Terminal

EPSON provides printer drivers for the TM-U220. The drivers are OPOS and Advanced Printer 
Driver (APD). They are for the Windows

 environment.

3.5.1  OPOS

3.5.1.1  Install and Set up.

When you install and set up, please refer to the User's Manual, the file is automatically created at 
the installation of OPOS ADK. 

DK

DC24V

FG

FG

Drawer kick connector 

Summary of Contents for C31C514452



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands