manualshive.com logo in svg

Epson C31C514452, Technical Reference Manual

Share
Download
Epson C31C514452 Technical Reference Manual Download Page 33

Rev. H

System Planning   

2-1

TM-U220 Technical Reference Guide

Chapter 2

System Planning

This section provides you information for system planning.

2.1  Control Method

A TM printer can print and be controlled using any of the following three methods:

1. Windows printer driver (EPSON Advanced Printer Driver) 

2. EPSON OPOS ADK

3. ESC/POS commands

Depending on the driver or interface to be used, an IP setting tool for the Ethernet specification, 
a USB device driver, and a logo registration utility for printing (TMFlash logo utility) are 
provided.

 See “How to Get a Driver” in this chapter.

2.1.1  Windows Driver (EPSON Advanced Printer Driver)

The EPSON Advanced Printer Driver is a method for controlling the TM printer in the same 
manner as the Windows standard printer driver. 

2.1.1.1  General Features of the EPSON Advanced Printer Driver

The EPSON Advanced Printer Driver has the following features:

❏

Supplies the Windows printer driver for the TM printer, which enables printing through 
general Windows applications.

❏

Enables executing unique functions of the POS printer, such as paper cutting and drawer 
opening.

❏

Font type selection enables printing with the printer’s internal fonts.

❏

Enables obtaining the printer status by StatusAPI with a programming language such as 
VisualBasic. This makes it possible to have bi-directional communication with the TM 
printer under the Windows standard printer driver environment.

Note:

The statusAPI is the API for controlling the printer, which is supplied exclusively by EPSON. Using this 
enables obtaining printer status and transmitting ESC/POS commands.

Summary of Contents for C31C514452



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands