Epson C31C514452 Technical Reference Manual Download Page 17

Page: 17 / 154

Rev. H

General Information

1-3

TM-U220 Technical Reference Guide

1.2.3 Related materials for TM-U220

TM-U220 has the related materials listed in the following table.

Please contact your dealer to get these.

Note:

If you want to provide power from TM-U220 to a DM-D, you have to use “PS-180“ or “AC Adapter,C1.
” The “AC Adapter,C” cannot provide power to a DM-D.

Category

Name

Description

Options

WH-10

This is an optional unit for installing the printer on a wall.

DF-10

Affixing Velcro



tape

DC-21

This is optional power supply cable to gain power from user’s
power supply.

PS-180

EPSON power supply unit

DM-D105/D205,
DM-D106/DM-D206

Direct connection customer display (available only for some
serial interface models and some USB models)
(See the below NOTE also.)

UB-S01/02,
UB-P02II,
UB-U01II/02II,
UB-E01 etc...

Various interface boards. (Serial, Parallel, USB, Ethernet
interface)

POS
accessories

DM-D series

These are customer displays. (Line Display)

Consumables

Roll Paper

This is required to print.

Ribbon Casette

This is required to print.

Manuals

User’s Manual

This manual is packed in the carton box.

Technical
Reference Guide

This Manual.

FAQ about ESC/
POS command

This Manual is Quick Reference of ESC/POS command. and this
has a simple sample program & Tips.

ESC/POS
Application Guide

This Manual is Command Reference Guide of ESC/POS
command. and this has a supplement which has some sample
programs & Tips.

Drivers
(WIndows
environment)

OPOS ADK

This provides the OCX driver which is based upon OPOS. It has
Manuals, sample programs, and TMFlogo utility.

Advanced Printer
Driver

This is a Windows Driver. This Driver has a Manual, Sample
programs, and utilities to use the driver.

Utilities
(WIndows
environment)

Memory Switch
setting Utility

This is a utility to adjust the setting (Memory Switch) of this printer.
See “Memory Switches” (page 3-17) for details.

TMFlogo

This is a utility to store “NV bitmap“ into this printer. It helps
printing “NV bitmap.”

Summary of Contents for C31C514452



























































































































































Search results

Summary of Contents for C31C514452

Reviews:

Related manuals for C31C514452

Brands by name

Popular brands

Epson C31C514452, Technical Reference Manual

Search results

Summary of Contents for C31C514452

Reviews:

Related manuals for C31C514452

Brands by name

Popular brands