Epson C12C800WN (Net 802.11b Wireless Print Server) User Manual Download | Manualshive

Page: 63 / 68

background image

59

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio or television reception. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause interference to radio and television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

■

Reorient or relocate the receiving antenna.

■

Increase the separation between the equipment and receiver.

■

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

■

Consult the dealer or an experienced radio/TV technician for help.

The radiated output power of the print server is far below the FCC radio frequency
exposure limits. Nevertheless, the print server shall be used in such a manner that
the potential for human contact during normal operation is minimized.

WARNING

The connection of a non-shielded equipment interface cable to this equipment will
invalidate the FCC Certification of this device and may cause interference levels
which exceed the limits established by the FCC for this equipment. It is the
responsibility of the user to obtain and use a shielded equipment interface cable with
this device. If this equipment has more than one interface connector, do not leave
cables connected to unused interfaces. Changes or modifications not expressly
approved by the manufacturer could void the user’s authority to operate the
equipment.

For Canadian Users

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

ZLUHOHVVVHUYHUERRN3DJH)ULGD\0D\30

«
...
61
62
63
64
65
...
»

Summary of Contents for C12C800WN (Net 802.11b Wireless Print Server)





































































Reviews:

No comments

Related manuals for C12C800WN (Net 802.11b Wireless Print Server)

imageclass LBP251dw

Brand: Canon Pages: 72

ImageCLASS MF4270

Brand: Canon Pages: 248

imageclass LBP251dw

Brand: Canon Pages: 116

imageCLASS D1320

Brand: Canon Pages: 36

Brand: QMS Pages: 86

Brand: Oki Pages: 16

Brand: Fenix Imvico Pages: 88

Brand: olympia electronics Pages: 4

CX PRINT SERVER 550

Brand: Xerox Pages: 166

Brand: Lanner Pages: 43

Brand: Citizen Pages: 133

Brand: I-O DATA Pages: 49

Eserver xSeries 360 Type 8686

Brand: IBM Pages: 74

Brand: Radio Shack Pages: 42

SUPERSERVER 8045C-3R

Brand: Supermicro Pages: 118

NPort P5250A Series

Brand: Moxa Technologies Pages: 2

Brand: Tektronix Pages: 178

Brand: RackSolutions Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands