Epson AL-M300 Series User Manual Download Page 88

Page: 88 / 225

Note:

The printer does not enter the deep sleep mode in the following cases:

PS3

is selected in

Network

Emulation Menu

MS Network

is set to

Network Menu

To recover from the deep sleep mode, press the

Wakeup/Sleep

button. The printer recovers

automatically when it receives a print job.

Power Off Timer

(Power Off mode)

(For EU models only)

When this setting is set to

, the printer automatically turns off at the time specified in the

Time to

Off

setting. The printer does not enter the power off mode if it is receiving or sending data.

The printer recovers from the power off mode when the power switch is turned on.

Time to Off

(For EU models only)

Specifies the length of the time until the printer enters the power off mode if there are no button
operations and no jobs to be printed.

Note:

You can adjust the time before power management is applied. Any increase will affect the product's
energy efficiency. Please consider the environment before making any change.

Support Menu

Enter the

SUPPORT MODE

by pressing the

Down

button while turning the printer on, to make

Support Menu

and

Printer Adjust Menu

appear.

Important:

When formatting the CompactFlash or deleting the data, unplug the interface cables and do not
print files.

Support StatusSheet

Prints a sheet showing information about settings of

Support Menu

and

Printer Adjust Menu

Format CompactFlash

(For AL-M400 Series only)

Formats the CompactFlash memory in the printer if a CompactFlash memory is installed.

AL-M300/AL-M400 Series User's Guide

Using the Control Panel

Summary of Contents for AL-M300 Series


































































































































































































































Search results

Summary of Contents for AL-M300 Series

Reviews:

Related manuals for AL-M300 Series

Brands by name

Popular brands

Epson AL-M300 Series, User Manual

Search results

Summary of Contents for AL-M300 Series

Reviews:

Related manuals for AL-M300 Series

Brands by name

Popular brands