Problem
Action
Color registration is out of alignment.
Execute auto color registration adjustment.
1. Launch the Printer Setting Utility, and click
Color Registration Adjustment
on
the
Printer Maintenance
tab.
2. Deselect the check box next to
On
.
3. Click the
Start
button next to
Auto Correct
.
Clean the CTD sensor.
1. Clean the CTD sensor.
2. Launch the Printer Setting Utility, and click
Color Registration Adjustment
on
the
Printer Maintenance
tab.
3. Deselect the check box next to
On
.
4. Click the
Start
button next to
Auto Correct
.
See also:
“Cleaning the Color Toner Density (CTD) Sensor” on page 104
Print the color registration chart and manually correct the color registration.
1. Launch the Printer Setting Utility, and click
Color Registration Adjustment
on
the
Printer Maintenance
tab.
2. Deselect the check box next to
On
.
3. Click the
Start
button next to
Print Color Regi Chart
.
4. Select the paper size, and then click
OK
.
The color registration chart is printed.
5. Check the values with the straight lines on the chart.
6. Select the value for each color on the Printer Setting Utility.
7. Click the
Apply New Settings
button.
8. Click the
Start
button next to
Print Color Regi Chart
to print the color
registration chart again.
9. Adjust till all straight lines are at the value of 0.
See also:
“Adjusting Color Registration” on page 93
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.
Epson AcuLaser C1700 Series User’s Guide
Troubleshooting
92
