Epson Aculaser 2600 Series Owner'S Manual Download Page 205

Page: 205 / 473

Using the PostScript Printer Driver

205

1. Make sure that the printer is turned off. Insert the printer

software CD-ROM into your CD-ROM drive.

2. For Windows 2000, Me, 98, or NT 4.0, click

Start

, point to

Settings

, and click

Printers

. Then double-click the

Add Printer

icon.
For Windows XP, click

Start

, point to

Printer and Faxes

, and

click

Add a printer

in the Printer Tasks menu.

3. The Add Printer Wizard appears. Then click

4. For Windows Me or 98, go to step 6.

For Windows XP, 2000, or NT 4.0, select

Local printer

, then

click

Note:

For Windows XP or 2000, do not select the

Automatically

detect and install my Plug and Play printer

check box.

5. Select

LPT1

as the port the printer is connected to, then click

6. Click

Have Disk

and specify the following path for the

CD-ROM. If your CD-ROM drive is D:, the path will be

D:\ADOBEPS\ENGLISH\

Folder Name

\PS_SETUP

Then click

Note:

❏

Change the drive letter as needed for your system.

❏

The folder name differs depending on your operating system
version.

Operating system version

Folder Name

Windows Me or 98

WIN9X

Windows XP or 2000

WIN2K_XP

Windows NT 4.0

WINNT40

Summary of Contents for Aculaser 2600 Series


























































































































































































































































































































































































































































































Search results

Summary of Contents for Aculaser 2600 Series

Reviews:

Related manuals for Aculaser 2600 Series

Brands by name

Popular brands

Epson Aculaser 2600 Series, Owner'S Manual

Search results

Summary of Contents for Aculaser 2600 Series

Reviews:

Related manuals for Aculaser 2600 Series

Brands by name

Popular brands