manualshive.com logo in svg

Epson ActionPC 1500, Reference Manual, Page: 95 / 272

Share
Download
Epson ActionPC 1500 Reference Manual Download Page 95

FEATURE PRINT

You can use this Level 2 option to print out the printer’s

features to check whether your printer is working correctly.

Menu/submenu

Available options

 FEATURE PRINT

 PRINT

Press   to print out the feature page.

After you print the feature print, SelecType Level settings

return to their defaults and the printer clears its memory,

including any downloaded font data.

FONT

This Level 

1 

option selects one of the fonts available in the

current printer emulation. See Appendixes B and C in this

Reference Guide 

for information on the printer emulation you

are using.

FONT SAMPLE

This Level 1 option prints a sample of the fonts available for

your selected printer emulation. The portrait fonts and
landscape fonts are printed on different pages. Press   twice to

print the font sample.

Menu/submenu

 FONT SAMPLE

Available options

 PRINT

SelecType 4-11

Summary of Contents for ActionPC 1500

















































































































































































































































































Reviews:

No comments